Freon™ MO99 is the closest match to R-22 of all “no oil change” replacement refrigerants. … MO99 is compatible with mineral oil and POE oil providing a quick, cost-effective R-22 replacement, and can be topped off during service without removing the entire refrigerant charge.

Is MO99 a CFC?

Eventually after years of using Chlorine gases a hole began to form in the layer. Once this was discovered the Montreal Protocol was introduced. This Protocol is the reason R-12, R-22, and a host of other CFC and HCFC refrigerants have been phased out or banned across the world. … MO99 is an HFC refrigerant…

What happens if you mix Freons?

Indeed, mixed refrigerants can cause increased system pressures and temperatures, resulting in ineffective compressor cooling, reduced cooling, possible compressor damage, metering device malfunction, and inadequate oil return to the compressor, said Eugene Silberstein, director of technical education and standards, …

Can you mix refrigerant with R22?

Mixing R22 with R407C or any other refrigerant. According to the 609 EPA rule, mixing refrigerants is illegal and anybody caught doing so will be heavily fined. … If your system is running on R22 most likely is using mineral oil to lubricate the compressor.

Is MO99 any good?

Freon™ MO99 (R-438A) refrigerant has proven to be a reliable and cost-effective, non-ozone depleting retrofit refrigerant. Freon™ MO99 matches R-22 in terms of capacity and efficiency in most systems, but with a significantly lower discharge temperature that may prolong the life of the compressor.

What is MO99 refrigerant used for?

Freon™ MO99™ significantly lowers discharge temperatures, which may extend compressor life. It facilitates easy retrofitting in which the technician simply recovers the R-22, replaces critical seals, charges the Freon™ MO99™ refrigerant, and monitors for leaks.

Can I top off R-22 with MO99?

Freon™ MO99 should not be used to top off R-22 systems. Mixing refrigerants is not recommended. R-22 should be recovered using appropriate equipment and managed according to U.S. EPA guidelines specified in Section 608 of the U.S. Clean Air Act.

Is MO99 flammable?

This substance is not flammable in air at temperatures up to 100 deg. C (212 deg. F) at atmospheric pressure. However, mixtures of this substance with high concentrations of air at elevated pressure and/or temperature can become combustible in the presence of an ignition source.

What type of refrigerant is MO99?

R438A (Freon™/Isceon MO99) is a HFC blend, used as a replacement for R22 in domestic, industrial and commercial air conditioning systems. It is also a retrofit replacement for R22 in low and medium temperature refrigeration systems and DX chiller systems.

WHAT IS 407C refrigerant used for?

R-407C is a non-azeotropic mixed refrigerant composed of the three ingredients R-32, R-125, and R-134a, and was developed as a substitute refrigerant for R-22, used in applications such as air conditioning equipment and chiller equipment for medium temperature ranges.

Article first time published on

Can you put R410A in a R22 system?

No, you cannot. To make a short story long, R410A and R22 are refrigerants. They are both good refrigerants and they both work, but they have to be charged in the system at different pressures. R410A is a higher pressure system and R22 is a lower pressure system.

Can I mix R22 with R290?

Because R290 has similar saturated pressure-temperature characteristics and volumetric refrigerating capacity as R22, is miscible with the oils typically used in R22 compressors, is relatively cheap and is reported to yield favourable efficiency, it is often deemed as a desirable option to use in existing R22 systems.

How much does it cost to convert R22 to R410A?

The cost to convert a central air conditioner from R-22 to R-410A can range anywhere from $2,000 to over $4,500 in the New Jersey area. The bottom line? If your AC unit is 8+ years old, it’s usually not worth the cost to convert and you should just replace the entire R-22 unit with an R-410A unit.

What is the difference between 407A and 407C?

Freon™ 407C exhibits similar performance to HCFC-22 at air conditioning conditions, while Freon™ 407A exhibits similar performance to R-404A with lower capacity at low and medium temperature refrigeration conditions.

What is the best drop in replacement for R22?

The best replacement for R-22 Freon is usually R-407c. It has a very low loss in capacity (0 – 5%) relative to R-22 and is less expensive than many other R-22 replacement refrigerants. If a system has R22 in it already you cannot use a replacement refrigerant to simply add to the R22.

What happens if you put 134a in a 1234yf system?

yes R1234yf Freon gas can be replaced by R134a; the newer systems were designed with this in mind so no, there will be no damage to the compressor but some time in the future doing so may become illegal. >>

What is r458a?

TdX 20 is described as a next-generation refrigerant blend for use as a replacement for R22, R404A, and R507A refrigerants used in existing HVAC and Refrigeration equipment. …

What is 422b refrigerant?

Refrigerants: National™: HFC: R422B A retrofit blend that is designed to match R22 in air conditioning applications. … The hydrocarbon component in R422B helps promote oil return in systems containing mineral oil or alkylbenzene.

What is 421A refrigerant?

Summary. Choice™ R-421A is a unique non-ozone depleting replacement for R-22. Usable with Mineral, AB or POE oils, this refrigerant can be be used in air conditioning, medium and high temperature residential, commercial and industrial refrigeration applications.

Is it illegal to mix refrigerants?

Due to the destructive effects of the compositions of refrigerants on the environment, the EPA has banned the use of certain refrigerants altogether. These banned refrigerants were to be replaced with new ones, and mixing refrigerants became totally illegal.

Can you mix rs44b with R22?

The Environmental Protection Agency (EPA) in the United States does not permit the mixing of different refrigerants. However, it is known from experience in Europe that the unintended mixing of RS-44b with R22 will not generate higher pressure readings, loss of efficiency or component damage.

What is the GWP of R22?

The most common refrigerant today, R-22, has a 100-year GWP of 1,810, almost 2,000 times the potency of carbon dioxide, so just one pound of R-22 is nearly as potent as a ton of carbon dioxide.

How do you convert R22 to MO99?

1. Establish baseline performance with existing refrigerant. ( …
2. Remove all the old (R22 or other) refrigerant from the system into a recovery cylinder. …
3. Replace the filter drier and critical elastomeric seals/gaskets.
4. Evacuate system and check for leaks.

What is 404A refrigerant?

R-404A is a pseudo-azeotropic mixed refrigerant composed of the three ingredients R-125, R-134a, and R-143a, and was developed as a substitute refrigerant for R-502 and R-22, used in commercial refrigerator equipment for low and medium temperature ranges.

IS 407C better than 410A?

While R-410A’s operating pressure at high ambient temperatures is inarguably higher than that of R-407C, at Super Radiator Coils, we’re able to produce UL-listed solutions that use R-410A for up to 700 PSIG, making it a completely safe and effective refrigerant for warmer climates.

How do you charge a 407C?

As with any other refrigerant blend, when charging equipment with Freon™ 407C, remove liquid refrigerant from the cylinder to charge the unit. Returnable cylinders containing Freon™ 407C are equipped with liquid and vapor valves.

Can I use R22 instead of R407C?

It is found after the careful observation that R22 performs somewhat better than R407C in many aspects i.e. COP, Cooling Capacity, Energy Consumption, and Exergetic Analysis but retrofitting point of view, it is best suitable refrigerant and R410A is suitable for new design.

Which is better R-22 or R410A?

Improved efficiency: R410A is able to absorb and release heat better than R22, making it more energy efficient. Plus, because it’s more fluid in temperature changing abilities, it does a better job heating or cooling your house quickly.

Do you charge 410A upside down?

Connect the yellow hose on the manifold gauge to the 410A refrigerant tank. Turn the handle on top of the tank to release refrigerant from the tank. Flip the tank upside down so that it will charge the system in a liquid state.

What happens if you mix r134a and R-22?

R-22 systems are typically about 300 psi maximum. If you add R-22 to an R-134a system, you will not get close to the rated cooling capacity of the A/C system. In conclusion, do not mix R-22 with R-134a refrigerants, you will ruin the charge, and possibly seriously damage or destroy your A/C system.

What refrigerant is used in home AC?

Most newer AC units use a refrigerant called R410A, or Puron. This chemical is an HFC (hydrofluorocarbon), but has been shown not to harm the ozone and, since 2015, has become the standard for residential air conditioning.