The apron, also known as the approach, is the part of the driveway closest to the road and usually made from the same material as the rest of the driveway.

Where is the apron of a driveway?

What is a driveway apron? It’s the area where your residential driveway meets the street pavement. You can transform that plain patch of tarmac by tearing up the section above the curb and replacing it with materials that look like they were taken from the streets of Brussels itself.

Can I widen my driveway apron?

Q: Can I widen my existing driveway? A: The private portion of an existing paved driveway can be widened, without a permit, up to the paving area limits described in Chapter 6.64 of the County Code.

Does a garage need an apron?

Why do you Need a Concrete Garage Apron? The concrete garage apron is necessary to provide a transition between the driveway level and the garage floor. The driveway is not always level with the garage floor.

What is a driveway skirt?

A driveway apron is the section where a private driveway connects to the public roadway; it is usually the width of the driveway and about 8′-15′ long (extending from the curb to the far edge of the sidewalk, or to the property line), although some decorative aprons can be 60′-70′ or longer.

What is a concrete apron?

A concrete apron, also known as “an approach,” is a section of concrete inserted in one of three places: In front of a garage. Around the perimeter of a building. The entrance to a parking lot or driveway.

How thick should a driveway apron be?

If you decide to pour concrete, I would pour the apron a minimum of seven-inches thick.

What is apron in culvert?

Apron: A hardened surface (usually concrete or grouted riprap) placed at either the invert of the culvert inlet or outlet to protect structure from scour and storm damage.

Should driveway be pinned to garage floor?

Driveway will freeze and rise before the garage floor does (unless your wife is like mine and leaves the door open all night and then closes it in the morning to trap the coldest air inside). Do not pin. Use an expansion joint, allowing the driveway to “float” for expansion (heat) and contraction(frost).

What is considered a curb cut?

Definition of curb cut 1 : a ramp cut into a street curb to provide access (as for wheelchairs or strollers) between a sidewalk and the street … and only 20 percent of our sidewalks have curb cuts.

Article first time published on

What are driveway ribbons?

What is a ribbon driveway? Ribbon driveways, sometimes called Hollywood driveways, usually consist of two parallel tracks paved with a hard material and separated by an unpaved area.

How much does it cost to pour a 24x24 slab of concrete?

A typical 24×24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.

What is a foundation apron?

1. What is an apron slab? An apron slab is a smooth impermeable surface constructed around a water point to prevent spilt water soaking into the ground.

What is an apron in a parking lot?

[′pärk·iŋ ‚ā·prən] (civil engineering) A hard-surfaced area used for parking aircraft.

What is apron building?

An apron is a raised section of ornamental stonework below a window ledge, stone tablet, or monument.

What does a driveway apron do?

Driveway Apron means that portion of a regularly established driveway lying between a property line and any curb, the purpose of which is to provide vehicular access from the street across the curb, parkway and sidewalk to the property fronting thereon or abutting thereto.

What is a pebble driveway?

Pebble driveways are smoother than a gravel driveway, but they still aren’t as smooth as asphalt. … Asphalt costs so much more because pebbles or gravel have to be laid down first and then the asphalt is placed on top of that foundation. With a pebbled driveway, construction is done once the rock is laid down.

Can you use river rock for a driveway?

River rock, for example, is not appropriate for a driveway. … Top layer choices for gravel driveways might include crushed shale, limestone, granite and concrete, along with other types of gravel in various colors to meet your aesthetic needs.

What are the parts of a driveway?

The component parts of the driveway approach are termed the apron, the end slopes or the curb return, and the sidewalk section.

How much does it cost to concrete a house?

Concreting can cost $50 to $150 per square metre, subjective to the levelling required, type of finish used and size of the job. Per m3 you can expect to pay $200 to $300 per cubic metre. Concreting is an essential element of most building projects, being utilised for driveways, house slabs and everything in between!

Can I put concrete around my house?

Subject: RE: Anyone put concrete around base of house? So long as the dirt around the foundation/basement wall is settled, it shouldn’t be a problem. Granddad did that to his house years ago and then the dirt settled from underneath the concrete leaving a large gap and the concrete slopping in toward the wall.

How do you pin concrete?

1. Drill 5/8-inch diameter holes six inches deep into the old concrete. …
2. Flush the holes with water.
3. Insert 12-inch lengths of rebar into the holes, twisting them to ensure an even coating of epoxy around their circumferences and along their lengths within the holes.

What is apron to floor?

Assuming a chair seat is about 16 inches off the floor, a rule of thumb on the distance from the bottom of the apron to the floor is 24 inches, Rockler says.

What is apron irrigation?

an impermeable covering of the bottom of a reservoir adjacent to a dam or some other water-retaining hydraulic-engineering structure. An upstream apron is used to lengthen the path of the water that is seeping through beneath the structure and to reduce the uplift on the bottom of the structure.

What is a bridge apron?

apron – a form of scour protection consisting of timber, concrete, riprap, paving, or other construction placed adjacent to abutments and piers to prevent undermining. arch – a curved structure element primarily in compression, producing at its supports reactions having both vertical and horizontal components.

Who created curb cuts?

A quick history lesson: curb cuts It all started with the curb cut movement in the revolutionary 60s in Berkeley, California. Ed Roberts, an activist and graduate student at University of California, Berkeley, was the leader of this revolution.

What are the different types of curbs?

• Barrier or Straight Curbs. As the name suggests, barrier curbs create a barrier to separate vehicles and sidewalks, stores, parking spaces or other spaces. …
• Mountable or Rolling Curbs. …
• Monolithic or Integral Curbs. …
• Mower Curbs. …
• Slanted or Sloped Curbs.