PAR38 BULBS are primarily used for outdoor lighting. PAR38 bulbs can be used as general flood and safety lights. Since these are available in with higher wattage options amongst the PAR series, PAR38 bulbs are perfect when light is required to reach farther, such as two-story ceilings or outdoor fixtures for instance.

Is a PAR38 bulb LED?

Using LED technology, PAR38s are more efficient than standard incandescent or halogen bulbs, meaning these last longer and use less energy. In fact, each PAR38 LED lamp can last up to 50,000 hours to save you money over the life of the bulb.

What is the difference between par 38 and BR40?

PAR38 will fit – the number denotes eighths of inches wide, so PAR38= 38/8″ width, or 4 3/4″w. A BR40 is 40/8″ inch wide, or 5″ wide. About the same size and will fit in the same fixtures.

What is the difference between PAR38 and BR30?

The number represents increments of an 8th of an inch. For example, a BR30 is 30/8ths of an inch or 30 divided by 8 which equals 3.75″ in diameter. The same example applies to a PAR38. Divide 38/8ths of an inch or 38 divided by 8 which equals 4.75″ in diameter.

How many watts is a PAR38 bulb?

PAR38 – 72 Watt – 90 Watt Equal.

How long is a PAR38 bulb?

PAR38 bulbs, the focus of this article, are always 4.75″ across (hence the 38 eights of an inch in the name) are great for five or since inch recessed cans.

How many lumens is a par 38 bulb?

High Power Bulb. While the average PAR38 LED Bulb is approximately 1200 lumens, this Bluex Bulbs PAR38 High Lumen Bulb boasts 3300 lumens! One bulb will light up your whole backyard! Energy Saver.

How long is a fluorescent tube?

Tube diameter in 1⁄8 in (3.175 mm)Nominal lengthNominal power (W)T84 ft (1,219 mm)36T85 ft (1,524 mm)58T86 ft (1,829 mm)70T1214–14.5 in (356–368 mm)14,15

What is a PAR30 flood light?

What are PAR30 Bulbs? Parabolic aluminized reflector (PAR) 30 bulbs control light more precisely. … Like all light bulbs, the 30 value represents the diameter of the bulb in 1⁄8 of an inch. Therefore, PAR 30 types are short light bulbs that are 3.75 inches in diameter.

What is PAR38?

What are PAR38 Bulbs? Parabolic aluminized reflector (PAR) 38 bulbs control light more precisely. LED PAR lights produce about four times the concentrated light intensity of general service A shape incandescents, and are used in recessed and track lighting. … Therefore, a PAR 38 is 4.75 inches in diameter.

Article first time published on

Can you use PAR30 instead of PAR38?

1 Answer. First the good news: Electrically it would be fine as long as the PAR38 bulb’s wattage does not exceed the receptacle’s maximum wattage.

Does BR30 fit E26?

The BR30 is for an E26 light socket, while the A19 is for an A19 socket. The E26 is a smaller / thinner socket and is a lot less common than the A19.

Can you use BR30 instead of BR40?

The 30 and 40 refer to the size of the bulb in 1/8 inches — 30/8 and 40/8 inches respectively. … For 4″ cans, you cannot choose BR40 bulbs — they’re too big. For 5″ cans, a BR30 will fit with a little space to all sides while a BR40 will fit with little to no space on the sides.

Is BR40 same as R40?

Is R40 the Same as BR40? While R40 sounds similar to BR40, they are very different in design and application. The biggest difference between R, BR, and PAR flood light bulbs is the reflector which is the part of the bulb that reflects and distributes the light emitted.

What is the difference between BR30 and BR40?

Within the floodlight category, the main difference between the BR30 LED and the BR40 LEDs that I tested is the amount of light produced. With 1100 lumens, the BR40 LEDs are about 40 to 70 percent brighter than the BR30 LEDs. In a two-story space they’ll “wash” the walls and ceiling as well as the floor.

How many lumens is a 90 watt LED flood light?

90 watt LED light produces 8100 lumens – permanent mount – 2400′ x 140′ spot or 1500′ x 250′ flood(-black-flood).

What is an E26 base?

The term E26 refers to a light bulb’s cap or base – the bulb component that allows for both electrical and mechanical contact. The letter “E” in E26 refers to Edison Screw, the most standard of lamp bases, while the numerical “26” refers to its diameter in millimeters (approximately 1 inch).

What is par Lighting size?

PAR Bulb NumberBulb Diameter202.5 inches303.75 inches364.5 inches384.75 inches

What is the difference between PAR30 and BR30?

Manufacturers use standard numbers like PAR30 or BR30 to indicate the bulb size. The number indicates the diameter of the lamp portion, not the base of the bulb. Notice that a PAR30 is the same diameter as a BR30 bulb. … LED bulbs do not require a reflector to produce the same light due to the technology used.

Can light bulb sizes?

The number following the letters in a recessed light bulb indicates size: it’s the diameter of the light bulb in eighths of an inch. So, a BR30 is 30/8 inches, or three and 3/4 inches. An MR11 is 11/8 inches. So, you can swap out a PAR30 for an R30 or a BR30 – they are all the same size.

What is a A19 light bulb?

The most commonly used A-series light bulb type is the A19 bulb which is 2 3⁄8 inches (60 mm) wide at its widest point and approximately 4 3⁄8 inches (110 mm) in length. This is the classic shape that most people are used to when shopping for a “Light Bulb”.

What is the difference between A19 and BR30?

The shape is the first difference you’ll notice between the two bulbs. The “A” in A19 refers to the overall shape of the bulb. … The BR30 bulb is the complete opposite of the A19’s curved shape. “BR” stands for “bulge reflector,” which the bulb uses to point light straight ahead from its flat end.

Can I use PAR30 instead of PAR20?

PAR30, PAR20, and PAR16 bulbs are great replacements for incandescent bulbs but can easily replace other LED bulbs, such as BR (Bulged Reflector) bulbs. PAR Bulbs and BR bulbs are virtually interchangeable as far as the fixture, but the type of light they produce is much different.

What does PAR mean in LED light bulbs?

PAR stands for “parabolic aluminized reflector.” These bulbs have a lamp, reflector, and pressed lens inside the lamp to provide directional lighting. They have a shorter body than BR light bulbs with a bowl shape. PAR light bulbs have soft light, but with a more defined edge than BR bulbs.

What are PAR30 bulbs used for?

PAR30 bulbs are commonly used in both recessed lighting fixtures and track lighting, so they come with short neck and long neck options to accommodate this usage. PAR30 short necks are more often used in track lighting while the long necks are often used in recessed lighting cans.

Can I replace my fluorescent tubes with LED?

Yes, you can replace fluorescent tubes with LED tubes or LED-integrated fixtures. If you just want to replace the bulbs, you can use plug-and-play, direct-wire, or hybrid LED tubes. Plug-and-play tubes are the easiest to install as they do not require any rewiring to the fixture.

Why are fluorescent lights bad?

The Bad: Fluorescent tubes & CFL bulbs contain a small amount of mercury gas (about 4 mg) – which is toxic to our nervous system, lungs and kidneys. So long as bulbs stay intact, the mercury gas is no threat.

Can I use LED tube lights in a fluorescent fixture?

Many LED tubes are “plug and play”, meaning you can just install them like you would a fluorescent bulb. For this to be true, look for bulbs that are “ballast-compatible” meaning that they can use the ballast already installed in your fluorescent fixture to power the LEDs.

How many lumens is a 150 watt flood light?

150 Watt LED puts out 20,000 Lumens and can replace a 400 or 500 watt Metal halide MH or HPS/HID light. 5000K light color ensures a bright clear light.

What is par rating for light bulbs?

PAR (short for Parabolic Aluminized Reflector) bulbs are lamps with “spot light” features, meaning that they provide a beam spread that is typically lower than 45°. Use PAR bulbs when attempting to put a focused beam of light on an object such as in track lighting or illuminating artwork.

What is the difference between R and BR bulbs?

BR bulbs are descendants of the R-shape bulb and therefore very similar in shape. However, the “Bulged Reflector” bulb (abbreviated as “BR”) includes an extra reflector in the neck of the bulb to better capture and cast light forward which was previously lost in the neck and sides of the standard R bulb.