The free chlorine generated from dichlor helps provide clear water by killing algae and by destroying organic matter that will cloud the water if allowed to build up. Chloramines, the most common cause of unpleasant odors, are also eliminated by the action of free chlorine.

Is dichlor good for pools?

Dichlor is a common type of granulated chlorine, but it’s not the best choice for every pool or every pool owner. Dichlor can be volatile and carries with it a risk of a stabilizer buildup, so care should be taken in storage and monitoring pool water’s stabilizer level.

Can you shock a pool with dichlor?

If you are low on CYA, sodium dichlor may be perfect for restoring order to your pool’s chemistry. And again, since sodium dichlor is a solid, granular shock, be sure to dissolve it in water before introducing it to your pool.

Will dichlor kill algae?

Add Vinyl Shock (Dichlor) as directed on the manufacturer dosage suggestion for use with algae. Allow the pool pump and filter to run for full 24-hour days and backwash your filter as much as possible. Again if you see any remaining black algae get it out of the pool as quickly as possible.

Is dichlor the same as shock?

Dichloroisocyanuric Acid: Also known as “dichlor,” this is another type of chlorine shock. Dichlor contains both chlorine and cyanuric acid and will, over time, raise your cyanuric acid levels.

Is dichlor a chlorine?

Dichlor is the only packaged chlorine form suited for spas because although it is a little more expensive, it has near-neutral pH and does not require the addition of cyanuric acid stabilizer. … It is best to dissolve dichlor in a bucket of clean water first, then add to spa water.

Will dichlor lower pH?

Sodium Dichlor is nearly neutral with a pH of 6.5 so you don’t change pH every time you dose with chlorine.

Does dichlor go bad?

The simple answer to this question is yes. Like any chemicals, chlorine tablets go bad if left long enough or improperly stored. Kept in the right conditions, however, and they can remain effective for over five years. … Chlorine tablets, also known as Trichlor tablets, are the most common type of pool.

Does dichlor lower alkalinity?

Using trichlor or dichlor means that the CYA level will change (and go up) constantly. In fact, for trichlor, every 10 ppm of FC added to the water will increase CYA by 6 ppm. … This low pH lowers pool water pH and alkalinity.

Is dichlor toxic?

Acute Toxicity: This product is corrosive to all tissues contacted and upon inhalation, may cause irritation to mucous membranes and respiratory tract. The dry material is irritating to the skin. However when wet, it will produce burns to the skin.

Article first time published on

What is dichlor granular used for?

Dichlor Spa Sanitizing Granules is stabilized chlorine shock for hot tubs & pools. Clears many water problems quickly. Also ideal for occasional use with alternative sanitizers, or super-chlorination procedure. You cannot buy more effective dichlor at any price.

Is dichlor or Trichlor better?

Trichlor slowly dissolves and is ideal for daily chlorination, is cheaper and is easier to maintain. Trichlor is more of a set and forget method with its tablets. Dichlor is better for raising your levels of chlorine and cyanuric acid quickly.

How do you shock with dichlor?

To add a Dichlor shock — such as Leslie’s Chlor Brite — to your pool or spa, simply measure out the amount needed per the volume of water and Parts Per Million (ppm) lift needed. Then sprinkle it around the perimeter of the pool or spa with the main circulation system running.

What is granular Dichlor?

Dichloro Granules are 99% Sodium dichloro-s-triazinetrione dihydrate with 56% available chlorine. It is dissolving stabilized chlorinating granules quickly. And it is an ideal sanitizer.

Can you mix Trichlor and Dichlor?

Be careful not to mix dichlor with the wrong chemicals because even the residue of can trigger a reaction. It’s not the cheapest form of the chlorine at almost double the cost of trichlor tablets (per pound of chlorine), though it’s still not as expensive as lithium hypochlorite.

Does dichlor raise CYA?

Both dichlor and trichlor are over 50% CYA by weight. Daily application can easily lead to a concentration of 80 parts per million (ppm) CYA. … For every pound of dichlor added (roughly two 3″ tablets) to 10,000 gallons of water, the CYA increases 6‒7 ppm.

Does dichlor have stabilizer?

Although it may not be commonly used by some pool owners for routine shocking, dichlor has some advantages over other types of chlorine. For one, dichlor has a built in stabilizer that keeps chlorine from burning off due to the sun. Most pool owners add stabilizer, or cyanuric acid to lessen and control burn-off.

How does Dichlor affect pH?

Using Dichlor will contribute to the level of cyanuric acid in the pool. … The pH level of Dichlor is nearly neutral (7.0), and won’t affect the pH of the pool water noticeably, is fast dissolving and because it’s sodium based, it won’t contribute to calcium levels in pools.

Can I use Dichlor in a vinyl pool?

It’s one of the most familiar and trusted products in the pool industry, yet few people who use it dichlor, in their vinyl liner pools, know much about it. … Ands it’s totally safe for vinyl liner pools. It’s typically sold in granular form and provides a simple way to chlorinate vinyl liner pools.

Is Dichlor the same as bromine?

Dichlor is your traditional chlorine. It does work. Usually dichlor comes in a granular form that you pour into the spa after each use. Bromine is a chemical that is similar to chlorine but has many differences.

Why does pool pH keep rising?

Algae raises the pH of water too Algae consume carbon dioxide, which removes it from solution. In effect, this consumption of CO2 raises the pH, and enough algae can raise the pH of your swimming pool well above 8.2.

Is it safe to swim in a pool with low alkalinity?

Your swimming pool can come to immeasurable harm if it contains water with low alkalinity. You risk your pool walls becoming etched, delaminated, or cracked. … Asides its effects on your pool, a low alkalinity swimming pool is unsafe for swimmers as the acidic water can cause nasal, eye, and skin irritations.

What causes low pH in pool?

As outlined above, low pH levels in your pool water can create manifold problems from maintenance issues like eroded fixtures through to irritated skin and eyes. The majority of cases of low pH water are caused by overuse of the pool, improperly balanced chemicals, or heavy rain.

How long does chlorine last in pool water?

Tap water chlorine dissipates almost fully in a day, but pool chlorine takes about 4 1/2 days. (Rough orders aro too many variables.) There are compounds which are considerably slowed by catalysts that make keeping a swimming pool level stable.

How long is pool chlorine good for?

For example, dry pool chlorine will not expire for a long time, while liquid pool chlorine will expire quickly. If you have any pool chemicals in liquid form, they will only last up to two months before they begin to become ineffective.

Why is there a shortage of chlorine tablets?

The shortage is due to increased demand for pool supplies during the pandemic and a chemical fire at a BioLab facility in Louisiana after Hurricane Laura that knocked out one of the country’s three main chlorine manufacturers.

Can you use Dichlor with bromine?

Dichlor is 100% compatible with bromine, Cleanwater Blue, Nature2 and Frog products, as well as non-chlorine shock. It’s recommended as a startup shock with these products, and also for quick water problem correction.

How does non-chlorine shock work?

Non-chlorine shock, such as Leslie’s Fresh ‘n Clear, is an oxidizer. It uses the power of “active oxygen” to destroy contaminants in pool and spa water. This eases the load of your regular FAC residual, allowing that chlorine to stay effective longer. This, in turn, prevents chloramines from building up.

What is Triazinetrione?

Trichlor—or “Trichloro-S-Triazinetrione” if you’re feeling adventurous—is a type of chlorine that’s commonly used in swimming pools. … You’ll typically find this in the form of 1″ or 3″ tablet that looks almost like a hockey puck (which is where the term chlorine pucks come from).

Is Dichlor the same as Trichlor?

The key difference between trichlor and dichlor is that the Trichlor (or trichloro-s-triazinetrione) is a dry solid compound having the highest possible chlorine content (around 90%) whereas, the Dichlor (or dichloro-s-triazinetrione) is available as its dihydrate form or the anhydrous form.

What does baking soda do for a pool?

Baking soda, also known as sodium bicarbonate is naturally alkaline, with a pH of 8. When you add baking soda to your pool water, you will raise both the pH and the alkalinity, improving stability and clarity. Many commercial pool products for raising alkalinity utilize baking soda as their main active ingredient.