Link. The small, usually curved connecting stroke between the upper bowl and lower loop in the double-storey ‘g’.

What is a loop in typography?

Definition: In a double-storey g, the loop is the enclosed or partially enclosed counter below the baseline that is connected to the bowl by a link. The enclosed or partially enclosed extenders on cursive p, b, l, and similiar letters are also called loops.

What is a leg in typography?

Legs are the lower angled strokes which you can see in the letters “K”, “R” and “Q”. They are also known as tails.

What is a finial in typography?

The finial, a tapered or curved end. The swash, an extended or decorative flourish that replaces a serif or terminal on a letter.

What is a descender in typography?

In typography and handwriting, a descender is the portion of a letter that extends below the baseline of a font. … Some fonts also use descenders for the tails on a few uppercase letters such as J and Q. The parts of characters that extend above the x-height of a font are called ascenders.

What is the cross in at called?

Strokes that connect, as in A and H, or cross other strokes, as in t, are also known as crossbars. A longer horizontal stroke at the top or bottom, as in E T, is called an arm. The bottom of the two-story g is called a loop; the very short stroke at the top is called the ear.

What is shoulder in typography?

Shoulder – The rounded part of a letter such as r, m, or n. … Descender – The portion of a letter that extend below the baseline, found in y, p, or q. Terminal – The end of any stroke in a letter that doesn’t end in a serif. Cap Height – The height from the baseline of a typeface to the top of the uppercase letters.

What is Apex in typography?

Apex: The uppermost connecting point of a letterform where two strokes meet; may be rounded, sharp/pointed, flat/blunt, etc.

What is the tail of Ag called?

There’s the one that almost everyone writes by hand, which is a circle with a tail that points left. It’s like the G in the Arial font, and the researchers call this one “opentail.” The other one, called “looptail,” is the kind you see in a font like Times New Roman: two circles, connected by a line on the left side.

What is crossbar in typography?

The horizontal stroke in letters. Also known as a Bar. Definition: The (usually) horizontal stroke across the middle of uppercase A and H is a crossbar. The horizontal or sloping stroke enclosing the bottom of the eye of an e is also a crossbar.

Article first time published on

What are the holes in letters called?

In typography, a counter is the area of a letter that is entirely or partially enclosed by a letter form or a symbol (the counter-space/the hole of).

What is font stroke?

It is a font form which hold the letter’s form only with information of centerline. In GP-Pro EX, it can enlarge the letter within the range of 6 to 127dot fonts, and display the letter beautifully. To use Stroke Font, select [Draw] in Menu Bar→[Text].

What is the stroke of a letter?

Stroke refers to the main body of the letterform. They may be straight, as in letters like l, z, k, v or curved like in c or o. The different parts of the stroke are given below: The imaginary line on which most characters sit is known as the baseline (4).

What is bowl in typography?

bowl: a curved stroke that connects to either a vertical stroke or to itself. bracket: a piece that connects a stroke to a serif.

What is ascender and descender in typography?

Ascender/Descender The ascender is the upward stroke above the x-height in a lowercase letter like d, b, or h. It should touch the ascent. Dawnora Headline has short ascenders that make the letters appear much wider. The descender is the opposite: it reaches from the baseline to the descent in letters like q, p, and j.

What is descender in graphic design?

Descender: in typography, the part of the letterform that dips below the baseline; usually refers to lowercase letters and some punctuation, but some typefaces have uppercase letters with descenders.

What is ascender and descender?

An ascender is the part of a lowercase letter that extends above the mean line of a font, or x-height, whereas the descender is the part that appears below the base line of a font. … Letters with ascenders are usually: b, d, f, h, k, l, t. Letters with descenders are usually: g, j, p, q, y.

What are font swashes?

A swash is a typographical flourish, such as an exaggerated serif, terminal, tail, entry stroke, etc., on a glyph.

What is bracket in typography?

Definition: The bracket is a curved or wedge-like connection between the stem and serif of some fonts. … Brackets may taper all the way to the end of the serif or attach at a midpoint before the serif ends. Brackets are tall punctuation marks used in matched pairs within text, to set apart or interject other text.

What is the line on the T called?

What is it called? I mean the horizontal line that is drawn across on capital T and small t. Yes, it’s a dot over the i. The horizontal line on t and T could be called a bar.

Why is there a dot on i and j?

The dot is just called superscript dot. It was added to the letter i in the Middle Ages to distinguish the letter (in manuscripts) from adjacent vertical strokes in such letters as u, m, and n. J is a variant form of i which emerged at this time and subsequently became a separate letter.

What is the dash on the letter T called?

Generally, a diacritic dot such as a tittle is also referred to as a glyph, a mark that adds meaning to the written letter.

Why does cursive M have 3 humps?

Proponents of penmanship say writing words in an unbroken line of swooshing i’s and three-humped m’s is just a faster, easier way of taking notes. Others point out that students should be able to understand documents written in cursive, especially when getting a letter from grandma.

Why are there two lowercase A's?

“The TL;DR is that it’s basically a historical accident: There were loads of variations of the letter ‘a’ and one became standard in printing while a less fancy one became standard in handwriting, presumably because people are lazy when they have to do things by hand,” writes Reddit user F0sh.

What is the hardest letter to type?

The letters Z and J were equally the most difficult (59% correct) and O was the easiest letter (95% correct) for 5-year-old children.

What is San Serif in typography?

Sans serif typefaces are considered more modern than serif typefaces. They lack the strokes that distinguish a serif typeface, hence the use of the French word “sans,” which means “without.” Sans serif typefaces are often used to signify something clean, minimal, friendly, or modern.

What is baseline in text?

Baseline. The baseline is the invisible line upon which a line of text rests. … The baseline is the invisible line upon which a line of text rests. In Material Design, the baseline is an important specification in measuring the vertical distance between text and an element.

Does the letter O have a bowl?

Definition: In typography, the curved part of the character that encloses the circular or curved parts (counter) of some letters such as d, b, o, D, and B is the bowl.

Does the letter R have a counter?

A counter is an empty space within a letter that is generally completely closed off. Letters in our alphabet that possess them are the capital letters A, B which has two counters, D, O, P, Q, and R, and the lower-case letters a, b, d, e, g, o, p, and q.

What is the white space located inside letters like O and P called?

The white space located inside letters like o and p is called a counter. In typography the area of a letter which is entirely or partially enclosed by a letter form or a symbol is known as a counter.

What is stroke in CSS?

The stroke property paints along the outline of the given graphical element. The fill and stroke properties specify the paint used to render the interior and the stroke around shapes and text. The presentation attribute will be overridden: e.g. <path stroke=”#1c87c9″ … />, it will be overridden. …