In a precarious position; also, in a state of keen excitement, as from danger or risk. For example, When the stock market crashed, their whole future was on the edge, or Skydivers obviously must enjoy living on the edge. 2.

Can you lay bricks on their side?

It doesn’t mean you cannot put the brick on its side. If what you are building is small, or you are doing decorative work, it should be possible. If you are building something that needs to meet an official code or has any load barring on it, it might not be the best idea. Or maybe there are ways around it.

What is the meaning of idiom on velvet?

informal, dated. In an advantageous or prosperous position.

What is the finishing course of bricks on top of a wall?

To finish the top of a wall, a course of bricks is often laid on one of their stretcher edges. This is called, again inventively, a Brick On Edge course. Another way of finishing a garden wall is by using coping stones.

What does feeling edgy mean?

adjective. If someone is edgy, they are nervous and anxious, and seem likely to lose control of themselves. [informal] She was nervous and edgy, still chain-smoking. Synonyms: nervous, wired [slang], anxious, tense More Synonyms of edgy.

Why lay bricks frog up?

This is commonly called a ‘frog’. The frog reduces the amount of material used to form the brick, makes it easier to remove from the form, and gives the completed wall better shear resistance. It may also help heat reach the centre of clay bricks in the kiln.

Why do bricks have indentations?

‘Frogging’ – the familiar (usually pyramidal) indentation in bricks – originates from the ancient Egyptian custom of creating hollows in their Nile-clay bricks, in which they interred live animals (usually infant) as building work progressed.

What is the edge of a brick called?

Top and bottom surfaces are called Beds. Ends or narrow surfaces are called Headers or header faces. Sides or wider surfaces are called Stretchers or stretcher faces.

What is the frog on a brick?

A frog is a depression in one bearing face of a molded or pressed brick. The frog reduces the weight of the brick and makes it easier to remove from the forms. … Some experts say that bricks containing frogs should be laid with the frog up so that the frog is completely filled with mortar.

What is the brickwork around a window called?

Canopy A covering or hood above a door window. Capping The top course/covering (tile, stone, brick) of a wall designed to protect the wall and throw off rainwater. Also called coping.

Article first time published on

What is brickwork bonding?

Bonding is the arrangement of bricks in a structure such as a wall or column. … Bricks are typically laid to an offset pattern to maintain an adequate lap between joints from one course to the next and to ensure that vertical joints are not positioned above one another on consecutive courses.

What is the meaning of hit below the belt?

See synonyms for hit below the belt on Thesaurus.com. To say something that is often too personal, usually irrelevant, and always unfair: “To remind reformed alcoholics of their drinking problem is to hit below the belt.” The expression comes from boxing, in which it is illegal to hit an opponent below the belt.

What do you mean by antlers?

: a bony branching structure that grows from the head of a deer or related animal (as a moose) and that is cast off and grown anew each year. Other Words from antler. antlered \ -​lərd \ adjective. More from Merriam-Webster on antler.

What does the phrase on the dot mean?

Definition of on the dot informal. : exactly at a particular time She arrived at 3 o’clock on the dot. I expect you to be here on the dot of 5.

Is edgy and emo the same?

Emo- Dye their hair bright colors, piercings. Emo means emotional and thus relates to anger, jealously, sadness, grief etc. Edgy- doesn’t dress like emo or goth, but still is mildly similar in style. self harming isn’t a joke btw and just because you do it, doesn’t mean your emo.

What is an edgy girl?

1 usually postpositive nervous, irritable, tense, or anxious.

Is Edgy an insult?

However, in the years that have passed since those films were released, “edgy” has become an insult, a word that implies that a person or franchise deliberately acts “dark” or controversial simply to attract attention or appear to be “mature;” i.e., if a person says “oh, you are so edgy,” they usually are saying it in …

How bricks are laid?

Bricks can be laid as part of the construction of walls, foundations, columns and other structures. … A mortar bed is generally laid on top of the footing along the string line, using the trowel to make a V-shaped trough along the mortar as this enables the bricks to be tapped into position more easily.

Can you lay brick on wood?

Although brick flooring installation on a wood subfloor will be slightly different than on a concrete floor, the outcome will be pleasing and long lasting. The average do-it-yourself homeowner can install brick flooring on his wood subfloors in one to two days, depending on the size and scope of the project.

What frog down means?

Frog down is taking a shortcut, because bricklayers who tend to lay bricks in this way do it for speed. It is rare to see a bricklayer who lays frog down ensure that the frog is filled with mortar by placing the brick in position on the trowel. It takes longer than laying frog up.

What is racking back in brickwork?

racking back (raking back) The stepping of bricks at the ends of the wall to be laid/constructed. The *bricklayer uses the stepped bricks as a guide for level and line to complete the wall…. …

Why do bricks have 3 holes in them?

The holes make the bricks weigh less. 3. Holes allow a consistent heat distribution throughout the brick when it is cooking in the kiln, resulting in a thorough and even cure. … These holes, filled with mortar provide a “keyway,” locking one brick to the next.

Should you wet bricks before laying?

Well-made clay bricks should never require wetting before laying except (rarely) under extremely hot and windy conditions. … With highly porous bricks there is a danger that they might rapidly absorb moisture from the bedding mortar (particularly in warm weather) causing it to stiffen quickly.

What are hollow bricks?

Hollow bricks are an Eco-friendly Construction material that is manufactured by recycled waste and materials like coal ash, rice husk, and fly ash. … These bricks are used mostly in partition walls in the building, but they can be used as load-bearing walls as per their compressive strength.

What are snapped headers?

1 : a half brick appearing like a header in a masonry face but not extending in beyond the facework. 2 : a bond stone not extending through the wall.

What is a brick lap?

 Lap : Lap is the horizontal distance between the vertical joints of successive brick courses.  Perpend: A perpend is an imaginary vertical line which includes the vertical joint separating two adjoining bricks.

What is the area around windows called?

The frame is the outermost area, or casing of the window, and inside it are the sash and the glass. The sash is the area inside the frame, the part that holds the glass. For example, on a single-hung window, the piece you slide to open the window is the sash.

What are lintels on a house?

A lintel or lintol is a type of beam (a horizontal structural element) that spans openings such as portals, doors, windows and fireplaces. It can be a decorative architectural element, or a combined ornamented structural item.

What is the wall below a window called?

Types of window sill A window sill in the most general sense is a horizontal structural element below a window opening or window unit in masonry construction or framed construction and is regarded as part of the window frame. The bottom of a window frame sits on top of the window sill of the wall opening.

What is the weakest brick bond?

Flemish bond This bond resembles the monk bond. It differs in that all courses consist consecutively of a header and a stretcher. An often used bond that includes a little more cutting work. This bond is weaker than English bond at one brick thick.

Which bond is stronger in brick masonry?

The header Bond in brick is considered to be the strongest and widely used bond in masonry construction. Header means a shorter square span face of the brick which has dimensions 9cm x 9cm. The arrangement is such that it forms the strongest bonding between bricks, making it the strongest bond for bricks.