The Daily Insight

Connected.Informed.Engaged.

general

What is a return in architecture

Written by Sarah Cherry — 0 Views

: a wall that makes a decided angle with and is approximately the same height as an outer wall of a building and that is distinguished from a partition or a low wall carrying a partition.

What is a return in building terms?

Return. The trim turns from something to something else. In the case of the head crown, it turned to the wall and dies into the wall.

What is return in carpentry?

It looks finished and professional if you do a mitered “outside corner” so the trim turns a corner on itself. … That end is called a “return”.

What are wall returns?

Here’s the promise: We will gladly replace a Walls Outdoor Goods garment with an equal or better item, or a refund, if you are not satisfied for any reason. You can be confident in our guarantee because we’re confident in what we make. If something is not meeting your expectations, contact us. We want to make it right.

What is ledge in architecture?

In architecture, a cornice (from the Italian cornice meaning “ledge”) is generally any horizontal decorative moulding that crowns a building or furniture element—for example, the cornice over a door or window, around the top edge of a pedestal, or along the top of an interior wall.

What is return wall in culvert?

These walls when placed at an angle with the road embankment in the form of “wings” are known as “wing walls” whereas they are termed as “return walls” when placed parallel to the embankment (Fig. … 20.1).

What is a return wall in civil engineering?

[ri′tərn ‚wȯl] (building construction) An interior wall of about the same height as the outside wall of a building; distinct from a partition or a low wall.

What is the meaning of rocky ledge?

1 consisting of or abounding in rocks.

What is an architectural reveal?

In carpentry, a reveal is a feature resembling a rabbet, but constructed of separate pieces of wood. … A “tight reveal” is where the distance to the edge of the casing is kept as small as possible, to give a smoother, more consistent look, often thought to be more contemporary.

Why wing wall is provided?

Wing walls provide smooth entry of water into the bridge site and provide support and protect the embankment. Wing walls can serve as buttresses to support walls.

Article first time published on

What is parapet wall?

parapet, a dwarf wall or heavy railing around the edge of a roof, balcony, terrace, or stairway designed either to prevent those behind it from falling over or to shelter them from attack from the outside.

What is toe wall?

[′tō ‚wȯl] (civil engineering) A low wall constructed at the bottom of an embankment to prevent slippage or spreading of the soil.

What is curtain wall in bridge?

curtain wall – a term commonly applied to a thin wall between main supports not designed to withstand superimposed loads either vertically or transversely. curvature – the degree of curving of a line or surface.

What is substructure of bridge?

The substructure of the bridge consists of the portion of the bridge that supports the entire structure on the given surrounding soil. Substructure: The substructure consists of the portion of the bridge that supports the entire structure on the given surrounding soil.

What is dirt wall?

Dirt Wall is a background wall made from Dirt Blocks. A naturally occurring variety of Dirt Walls are generated with a new world, as the background in most caves and under most overhangs above 0 depth (above the Underground layer). They will not stop enemies from spawning and are not suitable for housing.

What is culvert in road construction?

Culvert is defined as a tunnel structure constructed under roadways or railways to provide cross drainage or to take electrical or other cables from one side to other. It is totally enclosed by soil or ground. … The design of culvert is based on hydraulic, water surface elevation, and roadway height and other conditions.

What is a cantilever retaining wall?

Cantilever retaining walls are constructed of reinforced concrete. They consist of a relatively thin stem and a base slab. The base is also divided into two parts, the heel and toe. … Use much less concrete than monolithic gravity walls, but require more design and careful construction.

What is an abutment wall?

Abutments support the ends of the bridge and transfer the loads from the superstructure into the ground. … The wall type abutment is generally several feet high and extends from the streambed to the bottom of the superstructure. These were generally used on single span bridges in an effort to keep the bridge shorter.

What is a return cut?

This is the cut—usually on the end of a board—that reveals the wood’s annual rings and the tiny structures that moved sap through the living tree. But even after a tree becomes lumber, the ends of these channels suck stain and finish in greater amounts than the face grain.

What is a quarter round return?

A return is a small piece of molding that neatly finishes off the end of a piece of quarter-round or shoe molding where it ends without turning another corner.

What are windows at the top of a wall called?

A clerestory window is a large window or series of small windows along the top of a structure’s wall, usually at or near the roof line. Clerestory windows are a type of “fenestration” or glass window placement found in both residential and commercial construction. A clerestory wall often rises above adjoining roofs.

What is a trim reveal?

Steps for Installing Door Trim. Casing should sit back from the face of the jamb by 1/8 inch to ¼ inch. This is called a reveal, and carpenters mark it all around the jamb with a sharp pencil and combination square.

What is a double reveal?

Fry Reglet Double LED Reveal installs in 5/8” drywall and provides a continuous, uniform band of light along the top and bottom edges of the reveal. Can be used in vertical and horizontal applications.

What word is round?

noun. any round shape, as a circle, ring or sphere. a circular, ring-shaped, curved, or spherical object; a rounded form.

What does soak up mean?

Definition of soak up 1 : to take in (liquid) : absorb The rag soaked up most of the water. 2 : to enjoy feeling or experiencing (something pleasant) in usually a slow or relaxed way We went to the beach and soaked up the sun/sunshine all afternoon. I sat at my table for an hour soaking up the atmosphere of the café.

What is the meaning of Sea Gull?

/ˈsiˌɡʌl/ a large bird that usually lives near an ocean or other large body of water.

What is abutment cap?

An abutment is a substructure unit located at the end of a bridge. Its function is to provide end support for the bridge superstructure and to retain the approach roadway embankment. … Their function is only to retain the approach roadway embankment and not to provide end support for the bridge.

What is a breast wall?

Definition of breast wall : a wall built to sustain the face of a natural bank of earth — compare retaining wall.

What is difference between wing wall and retaining wall?

A retaining wall is just that, designed to resist lateral forces of earth behind it. A wing wall can also be a retaining wall but often is used as part of the retaining wall system. Wing walls usually but not always run perpendicularly or nearly so, to a retaining wall.

What is the fence on a roof called?

A parapet is a barrier that is an extension of the wall at the edge of a roof, terrace, balcony, walkway or other structure. The word comes ultimately from the Italian parapetto (parare ‘to cover/defend’ and petto ‘chest/breast’).

What's the difference between a rampart and a parapet?

As nouns the difference between parapet and rampart is that parapet is a low retaining wall while rampart is a defensive mound of earth or a wall with a broad top and usually a stone parapet; a wall-like ridge of earth, stones or debris; an embankment for defensive purpose.