Osmo Top Oil is a food safe oil wax combination for treating furniture and providing a food safe wood finish to kitchen worktops made of wood. Once dry the microporous surface does not crack, peel, flake or blister. It is safe for humans, animals and plants and can be used on children’s toys.

Is Osmo top oil any good?

It is very durable and if applied correctly (thin coats brushed on with any excess immediately wiped off, and cut back lightly in between) it gives you a lovely natural silky finish. I have also used it for my kitchen worktops – still looking very good after 4 coats and 2 years.

Is Osmo top oil water based?

Osmo TopOil is based on natural plant oils and waxes. They are designed for wood where the microporous surface does not crack, peel, flake or blister. It is resistant to wine, beer, cola, coffee, tea, fruit juice, milk and water according to DIN 68861-1A – with no water marks.

How do you use top oil?

Method of Application Apply the first coat thinly along the wood grain with an Osmo Microfibre Roller, Flat Brush or Oil Finish Applicator Fleece. Allow to dry for approx. 8-10 hours. Ventilate well while drying.

Can Osmo top oil be used outside?

RECOMMENDED USE Osmo UV-Protection-Oil is ideal for all vertical wood surfaces in outdoor areas: doors, windows, window shutters (dimensionally stable elements), carports, timber cladding, balconies, fences, pergolas, and summer houses (dimensionally unstable elements).

Does Osmo oil darken wood?

A clear oil such as Osmo Polyx Oil will maintain the natural appearance, but will darken the wood again, much like when you wipe water over bare wood, it will enhance and enrich the woods natural tones.

Is Osmo a good finish?

A worktop will need 3 or 4 coats of oil to be fully protected, then a coat of oil every couple of years. Osmo is probably the best worktop oil on the market, certainly out of the products I’ve used. You’ll find it relatively easy to use and the finish is stunning.

Can you apply Osmo oil with a cloth?

Cloth Application Apply thinly with a clean lint-free cloth onto a clean, dry and smooth surface. Work it in slight circular motions along the grain. Once you’ve wiped on a thin layer, use a dry cloth and wipe off in the direction of the grain to avoid streaks.

Is Osmo a polyurethane?

Osmo hardwax oil is a hard wearing, clear finish for timber and cork flooring. It can also be used as an interior timber furniture and exposed beams coating. It gives the timber the perfect coverage an protection without crating a film on the surface. It is the natural alternative to polyurethane.

Is Osmo Wood Finish Food Safe?

Osmo TopOil High Solid is a Food-safe Hardwax-oil wood finish which is extremely tough and hardwearing. It is water repellent and dirt resistant as well as resistant to wine, beer, cola, coffee, tea, fruit juices, milk and water.

Article first time published on

What is Osmo oil made of?

Osmo uses carefully harvested natural oils (sunflower, soya, linseed and thistle oils) and hard waxes (carnauba and candelilla waxes) for it’s finishes.

Which Osmo oil is best for worktops?

Osmo top oil clear matt is ideal for oak kitchen worktops. It is easily applied, very durable, resistant to scratches, scuffs, stains and liquid spillages. Osmo worktop oil is also very easy to maintain and patch repair.

Is Osmo German?

Worldwide the name Osmo stands for quality from Germany.

What is Danish oil?

Danish oil is typically made from blends of Linseed oil and/or Tung oil, mineral spirits, synthetic resins and varnish to make it durable and easy to work with. Rustins Danish oil however is considered to be the ‘original’ formula.

Should you sand between coats of Osmo?

Sanding is not necessary between coats. However, de-nibbing with a pad may help to reduce any imperfections from the surface between each coat.

How long does it take for Osmo oil to dry?

How long does Osmo Polyx Hardwax-Oil take to dry? After applying the first coat of Osmo Polyx Oil with good ventilation it will take 8-10 hours to dry.

Can you polish Osmo oil?

When thoroughly dry, surface can be buffed or polished with hand polisher or buffing machine. The only difference in applying the Clear Extra Thin is to let it sit for 30 minutes before wiping away any excess.

How much Osmo top oil do I need?

When renovating, one coat applied to the clean and dry surface with a lint-free cloth is usually sufficient. Osmo Top Oil has a coverage rate of 1 litre approximately covering 24m2 with one coat. A single 500ml tin is normally suitable for an average sized kitchen with three coats.

Is Osmo oil durable?

Osmo Polyx-Oil is all those things. Made from natural vegetable oils and waxes, it does not off-gas or smell bad. It’s durable, easy to apply, and easy to repair. The secret to success with this oil is filling the pores first.

How do you prepare wood for Osmo oil?

Wood Preparation Clean or slightly sand old microporous finishes, remove old varnishes/lacquers by sanding. Small cracks, larger dents and small holes in the wood can be filled with Osmo Woodfiller. Sand carefully before application starting with a coarse paper – final sanding for flooring P100-150, furniture P180-240.

What is Osmo finish?

Osmo Wood Wax Finish is a satin-matte wood finish which combines all the advantages of oils and waxes in one unique product. Resistant to water and dirt, very durable and smooths wood surfaces. Easy application – no need for a primer or sanding between coats, which saves time and money.

Can Osmo go over stain?

I applied it over minwax stain. It worked fine, just make sure that the stain is well dried before applying the osmo. … We used an oil based Minwax stain and allowed it to dry overnight.

Can you wax on top of Osmo oil?

Wax on Oil is possible, if the oil is dry, as the wax can be buffed to a shine. It would be best with Sand and Oil only, but check with the application instruction and experiment in a small out of sight area.

Can I use Osmo top oil on chopping board?

The perfect wood oil protection for your kitchen worktops and chopping boards. Osmo TopOil provides hardwearing and elegant protection with food safe certification. Liquid spillages will tightly bead on the surface without leaving any marks – simply clean by wiping with a cloth.

Is Rubio monocoat food Safe?

Rubio Monocoat oil forms a molecular bond with the topmost microns of the wood. A knife can cut deeper than the product penetrates, leaving raw wood exposed and susceptible to mold and/or bacteria growth. However, as our product is Food Contact Compliant, it is acceptable to use on charcuterie and serving boards.

Is Osmo top oil flammable?

Hazard statements H226 Flammable liquid and vapour. Precautionary statements P101 If medical advice is needed, have product container or label at hand.

Can I apply Osmo oil over Danish oil?

My advise is Meths to remove as much as possible, sand to bare wood and 2 to 3 coats of Osmo worktop oil, far better than Danish oil and lasts years its very wipeable and much safer and cleaner around food.

Is Osmo oil oil based?

An oil and wax based biocide-free wood preservative for interior and exterior use and ideal for high moisture environments.

What is Danish oil good for?

A superior penetrating linseed oil finish that is polymerized for fast and easy application on interior woodwork and furniture. It is also ideal for wood paneling, cabinets, salad bowls, wood utensils, butcher blocks and surfaces that come in contact with food.

Can Osmo polyx oil be used on worktops?

Osmo Polyx Oil is resistant to water, dirt, wine, coffee etc and is microporous, so will not crack, peel or blister. A better option could be Osmo Top Oil that is specifically formulated for kitchen worktops and is available in a range of finish types including clear matt and satin, natural, white, acacia and more.

How do you protect wooden worktops from water?

Oil every surface of your worktop (including all the edges and the underside). Two generous coats of oil should be sufficient on the underside and the non-exposed edges, but on the exposed surfaces, ideally you should aim to add at least three to five light coats of oil to ensure water resistance.