Bolt DiameterMetricStandard3/8″14mm9/16″7/16″16mm5/8″1/2″19mm3/4″9/16″21mm13/16″

How many mm is 9 16?

Dimensions — Inches to MetricDecimal InchesFractional InchesMetric0.563”9/16”14.30 mm0.625”5/8”15.88 mm0.688”11/16”17.48 mm

How many MM is a 9/16 wrench?

BOLT DIAMETERSTANDARDMETRIC3/8″9/16″14mm7/16″5/8″16mm1/2″3/4″19mm9/16″13/16″21mm

Is 12mm and 9/16 the same?

10mm = just over 3/8 inch. 11mm = almost 7/16 inch. 12mm = almost 15/32 inch (= almost 1/2 inch) … 14mm = almost 9/16 inch.

What is a 16 mm in standard size?

MMApproximate Size In InchesExact Size In Inches15mmJust short of 5/8 Inch0.59055 Inches16mm5/8 Inch0.62992 Inches17mmJust short of 11/16 Inch0.66929 Inches18mmJust short of 3/4 Inch0.70866 Inches

What is 9/16 on a tape measure?

FractionDecimalMillimeters9⁄16”0.562514.28755⁄8”0.62515.87511⁄16”0.687517.46253⁄4”0.7519.05

What's equivalent to a 10 mm socket?

So what is a 10mm socket equivalent? The equivalent imperial size of a 10mm socket is a 3/8 socket. Imperial sizes are known as SAE (Society of Automotive Engineers) or Standard. Metric sizes, also known as SI (Système International), from the French International System.

Is a 3/8 the same as a 10mm?

It’s the same size. 3/8 is in inch and and its 10mm.

What is 9 over 16 as a decimal?

Answer: 9/16 as a decimal is 0.5625.

What is equivalent to 16mm socket?

Bolt DiameterStandardMetric7/16″5/8“16mm1/2″3/4″19mm9/16″13/16″21mm7/8″22mm

Article first time published on

How many MM is a quarter?

DenominationCentQuarter DollarDiameter0.750 in. 19.05 mm0.955 in. 24.26 mmThickness1.52 mm1.75 mmEdgePlainReededNo. of ReedsN/A119

How can I convert cm to mm?

To convert cm to mm, multiply by ten. To convert centimetres to millimetres, multiply by 10. 2.8 multiplied by 10 is 28. 2.8 cm is the same length as 28 mm.

What's equivalent to a 36mm socket?

InchesMillimetersSpanner1.41736mm36mm1.4181 7/16 AF1.4807/8 Wworth; 1in BSF1.5001 1/2 AF

What are standard socket sizes?

There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters). In-between sizes are available too, starting with 1/4 inch (0.6 centimeters) and increasing every sixteenth of an inch (0.16 centimeters).

What size is a 33mm socket in standard?

A 33mm metric socket is 1.29921 inches in size which most closely matches a 1 5/16 standard size socket.

What MM is 11/16 socket?

SAEMetricInch17mm0.66911/16″0.68818mm0.70923/32″0.719

What is 10 mm in fractions?

Millimeters (mm)Inches (“) (decimal)Inches (“) (fraction)10 mm0.3937 ″25/64 ″20 mm0.7874 ″25/32 ″30 mm1.1811 ″1 3/16 ″40 mm1.5784 ″1 37/64 ″

What size is 13 16 in MM?

Dimensions — Inches to Metric0.688”11/16”17.48 mm0.750”3/4”19.05 mm0.813”13/16”20.65 mm0.875”7/8”22.23 mm

Is M10 same as 10mm?

If the size is M10 x 25, that would mean that the diameter is 10 mm. … The 25 indicated a length of 25 mm. A matching nut would be labeled M10, which also doesn’t require a thread pitch since it’s a course thread fastener.

Is there a 10.5 mm socket?

1/4″ Drive Twist Socket – 10.5mm.

What size bolt is a 10 mm head?

The standard 6mm cap screw has a 10mm head.

Where is 9/16th on a ruler?

FractionDecimalMillimeters9⁄16“0.562514.28755⁄8“0.62515.87511⁄16“0.687517.46253⁄4“0.7519.05

How many inches is 9 16?

Inchesfractionaldecimal9/160.562511/160.687513/160.8125

What is a 16th on a tape measure?

The 1/16-inch mark is the absolute shortest line on the tape measure. It is also the first line that you will encounter after or before a whole-inch mark.

What is the simplest form of 9 16?

As you can see, 9/16 cannot be simplified any further, so the result is the same as we started with.

What is a 9 out of 16?

Now we can see that our fraction is 56.25/100, which means that 9/16 as a percentage is 56.25%.

What size is bigger 5/16 or 3 8?

For instance, 5/16 inches and 3/8 inches are two measurements on a ruler. In order to compare the two fractions, they must have a common denominator, 16. 3/8 is larger than 5/16.

Is there a 10mm socket?

In fact, the 10mm socket is one of the most commonly used metric size sockets of all. It’s no secret that the majority of parts under the hood and in the car require a 10mm. The applications may vary from car to car, but the 10mm is absolutely vital to complete a project.

Can I use a 3/8 instead of 10mm?

Yes, a 10mm hanger will physically fit on a 3/8″ bolt. 3/8″ = 9.525mm I don’t see any problem with that at all. Just don’t apply that thinking to drill bit diameters and bolt sizes!

What is SAE size?

SAE sockets are sized in inches and fractions of inches. Metric and SAE wrenches have different systems of measurement. Metric sockets and wrenches use the metric measurement system. This is when millimeters are used to describe the size. So you’d get a 20mm wrench in the metric unit of measurement.

What object is the size of a millimeter?

Small units of length are called millimeters. A millimeter is about the thickness of a plastic id card (or credit card). Or about the thickness of 10 sheets of paper on top of each other. This is a very small measurement!