We typically recommend that floors are professionally stripped and re-waxed every five to six months. Keeping them up to snuff is important, but don’t do it too often, as your floors are just going to be exposed to more traffic, more dirt, and more damage in that short period of time.

How much does it cost to strip a floor?

Strip & Wax Floor Prices HomeWyse states that average cost to strip and wax a floor is about $174. The lowest cost you could expect to pay is about $148 while the highest cost is about $200. This cost estimate is based on a 314 sq ft room. This makes the average cost of stripping and waxing a floor at $1.80 per sq ft.

How do you Rewax floors?

Put a white pad on a floor buffer. Buff the wax into the floor. As you buff, keep the passes all going the same direction. Once you buff the entire floor, go over it again, but this time buff at a right angle to the first time.

How long does it take to strip a floor?

Overall, when using a chemical stripping agent, the stripping process takes about fifteen minutes to sit before applying agitation to the floors. After the wax has been applied, it will cure overnight and can be used the next day.

Can vinyl flooring be stripped?

Before thinking of stripping your vinyl plank floor, you should never skip this step. So, you need to ensure that you clean your floor and remove any dirt that comes your way. In this section, you will need your vacuum cleaner to have good results as you remove dirt like chewing gum, small paper, and other things.

What color pad is used for stripping?

What color floor pad is used for Stripping? Black or black high-productivity floor pads are the darkest, most aggressive pads and should be the pad of choice when stripping a floor.

What does waxing a floor do?

Floor wax helps seal the porous wood surface, protects it from stains, hides scratches and dents and increases shine.

Do you have to strip floor before waxing?

Technically, you do not have to strip the floor before you wax it. However, if you believe that there are too many coats of wax on the floor, causing the floor to become dull, then it’s best to first strip the floor before applying a new coat.

How long does a strip and wax take?

The team at ServiceMaster of Kalamazoo are professionals that follow the important steps and techniques, using powerful equipment in order to produce a spotless, protective, and attractive finish to your floors in about 7 hours.

What materials are needed for stripping?

Supplies should include 1-2 gallons of stripper, 4-5 gallons of 20% floor finish (based on the number of coats you apply at 2,000 SF/coat), a sufficient number of neutralizer packets for the entire floor, a good quick change mop handle, mop heads (one cotton for stripping and pick up, one blended for neutralizer and …

Article first time published on

How much does floor wax cost?

The price you charge your client can vary due to several factors, but the national average is 30 to 60 cents per square foot. However, some jobs can go up to 90 cents or more depending on how difficult the job is.

When can you walk on a waxed floor?

It is a good idea to allow as much time as possible for all the coats to cure and adhere before allowing foot traffic across the floor. Typically 8 hours of curing is adequate before opening it up to the public. 72 hours is the recommended time for fresh finish to cure prior to burnishing.

What dissolves floor wax?

Combine 2 gallons hot water, 2 cups household ammonia and 1 cup of powdered dishwasher soap (with no bleach), and apply to the floor to dissolve the wax quickly.

Are waxed floors slippery?

Hardwood floors are not naturally slippery, but can become slick after applying a coating of wax or polish, or especially if the floor’s surface is dirty. The best ways to reduce the risk of slipping on your hardwood floor is to keep it clean and dry.

How do I know if my hardwood floors are sealed?

​To tell if your wood floor is sealed, find an inconspicuous area, dab a drop of water on the surface, and see if it soaks in or beads on top. If the water drop beads on top of the wood, your floor is sealed. Surface-sealed floors are stain and water-damage resistant and easiest to clean.

Can you strip vinyl plank floors?

Grasp the end of the plank with your hand to peel it up from the floor. Continue jabbing the planks with the floor scraper, taking care not to dig too deeply into the plywood subfloor. For stubborn tiles, warm the adhesive with a heat gun set on the lowest setting and pull up the tiles.

Can you strip vinyl plank flooring?

Yes, both vinyl plank flooring and LVT flooring can be removed and reinstalled when they’re installed with the floating floor technique.

Why is floor wax harmful?

Among the worst chemical offenders commonly found in mainstream floor wax are: Cresol, which can cause liver and kidney damage if inhaled over extended periods of time. … Other hazardous ingredients in traditional floor wax are nitrobenzene, perchloroethylene, phenol, toluene, and xylene.

Can you wax a no wax floor?

No-wax floors do not need to be waxed or buffed. No-wax floors should not be cleaned with liquid floor cleaners – it will only leave a waxy buildup on your floors.

What is the difference between floor sealer and wax?

A good sealer can protect pores from liquid damage. When a surface is left unsealed, liquids can seep into the pores and create stains. … Similarly, if you apply wax to the wrong kind of floor, stains will emerge after it has dried. Wax is a plastic chemical that can ruin a high-quality sealer.

What the floor pad colors mean?

Pad Types. An industry standard color-coding system for low-speed floor pads helps bring some logic to the situation. In general, moving from light to dark, least-coarse to most aggressive, are: pink, white, beige, red, blue, green and black. Buffing pads are lightest in color and remove scuff marks and dirt floors.

What is burnishing a floor?

To burnish/polish a commercially finished floor to achieve the highest possible shine.

Which of the following should be used to strip a hard surface floor?

Auto scrubbers are often the popular choice for stripping, because they can then be used to recover the stripping solution. If you are using an auto scrubber, leave the squeegee up and scrub the area once completely before putting the squeegee down and scrubbing again while at the same time, recovering the solution.

How do you strip and seal a floor?

1. Strip Floors. Sweep the floor to remove any rubbish. Scrape off any chewing gum and labels. Erect ‘wet floor’ signs and barricades to keep people off the floor. …
2. Applying a base coat. Let the floor completely dry. DO NOT buff the floor.

What is stripping waxing?

Strip wax is what most people think of when you mention waxing. It’s runny wax that’s applied in a thin layer using a disposable wooden spatula stick. Hair is then immediately removed by rubbing a disposable strip against it and quickly peeling it off. Hot wax is typically thicker in the pot and is applied thickly too.

Is it better to sand or strip wood floor?

For example if you have a painted finish on your wooden floor then stripping will likely be more effective, however if you want to remove a basic polyurethane finish and you need to do so during the colder months of the year then sanding will be more appropriate.

What is the difference between stripping and sanding?

Stripping a finish is faster than sanding to remove it. But more importantly, sanding cuts through stain and patina (the color changes in wood caused by light and oxidation), and it does so unevenly. …

Is it better to strip or sand hardwood floors?

If the hardwood floor has not been refinished before, it’s a better candidate for a manual stripping. … However, this often requires a professional: sanding down the floor can be dangerous for a non-professional, as it’s easy to sand down the floor unevenly.

What type of machine is used to strip floors?

Equipment needed to strip & wax floors. 1 rotary floor machine with clutch plate. This is the machine that you’ll run over the floor with the proper floor pad to agitate the stripper solution.

Why is there a need for striping sealing and finishing a floor?

The process of stripping actually involves removing the old sealer, which opens the floor up to any dust and residue that was hiding underneath. The benefits definitely provide a good reason for getting your facilities floors updated and brought back to life.

What does stripping someone mean?

To remove, take, or steal something from someone or something, especially in a forceful or brutish manner; to deprive someone or something of something.