If you only expect to use your miter saw for cutting trim or siding, and don’t plan on cutting anything more than an inch thick or 6 inches wide, a 10-inch miter saw should be sufficient. But if you need to cut larger boards, or just want more versatility, a 12-inch miter saw is the better choice.

Is a 12-inch miter saw too big?

True, the 12-inch is a more expensive machine, with more expensive, harder-to-find, smaller-selection blades, plus it’s heavy and unwieldy and makes less precise cuts. But – you knew a but was coming, didn’t you? – the 12-inch can cut wider and thicker boards than its smaller counterpart.

How big of a board will a 12-inch miter saw cut?

Manufacturers also make 12-inch versions, which have a maximum cut of about 7 1/2 inches, wide enough for two-by-eights. This larger saw can cut a maximum thickness of 3 1/2 inches, enough to cut through four-by-fours.

What size miter saw finish carpentry?

8-inch miter saw: Handy for around-the-house cutting; an 8-inch miter saw will make a 90-degree cut on a 2 x 4 and a 45-degree cut on a 1 x 2. 10-inch miter saw: A 10-inch miter saw will make a 90-degree cut on a 2 x 6 and a 45-degree cut on a 2 x 4.

Can a 10 inch miter saw cut a 2x8?

Typically, a 10-inch miter saw will cut a 2 x 6 at 90 degrees and a 2 x 4 at 45 degrees; a 12-inch miter saw will cut a 2 x 8 at 90 degrees and a 2 x 6 at 45 degrees. Saws also differ by whether the blade arm simply rotates (a basic miter saw) or both swings and slides (a sliding miter saw).

Can you put a 10 blade on a 12 Mitre saw?

Can we use a 10-inch miter saw blade on a 12-inch Miter Saw? – Quora. Yes. You just won’t have the blade reach. Meaning that you won’t be able to cut through bigger stock.

Will a 12 inch miter saw cut a 6x6?

The geometry that makes it a wide, flat cutter works against it with a taller block. No saw could cut through a 4×4 at a 45-degree bevel angle, nor could any cross-cut a 6×6.

What saw is best for cutting trim?

Typically, a table saw will provide you with the most functionality for this task. However, you may also need to use a jigsaw if you will be required to cut tight areas. Of course, if space and budget allow, investing in both a table saw and a jigsaw will allow you to work more quickly to finish the trim project.

What is a 10 inch miter saw good for?

It’s perfect for making crosscut and miter-cuts, as well as easily ripping through molding and framing applications (amongst others), due to the powerful motor.

What saw to use for baseboards?

The power miter saw is the most widely used for baseboard cutting. It cuts clean miters or straight, 90-degree crosscuts with precision and little or no splintering or grain-blowout.

Article first time published on

What saw for trim?

A power miter saw is the best way to cut crown moulding once you measure the angles. The saw can be adjusted to cut at any angle – set it to 45 degrees for one side of a standard 90-degree corner.

Can a 12 miter saw cut a 4x4?

A 12” miter saw clearly has a bigger blade. This means that it can do longer cuts faster as well as wider cuts. The cutting capacity is so superior that even the cheapest 12” miter saws on the market will still cut through 4x4s faster and cleaner than the best sliding 10” miter saw.

How long can a sliding miter saw cut?

Sliding compound-miter saws will work just like chop saws, but because their blades move back and forth on horizontal rails, they also can slice stock up to 15 inches wide in one stroke.

Can you cut a 2x12 with a miter saw?

Miter Saw Limitations The biggest drawback of a miter saw is that the smaller (and cheaper) sizes can’t cut completely through wide material, such as 2×10 or 2×12 boards, in one pass. Well, a sliding miter saw can make these cuts, but you’ll spend twice as much for one.

How deep can a 10 inch saw cut?

They can perform a variety of cuts, such as angled cuts, rips cuts, and crosscuts, making them a must-have for any carpentry project. The vast majority of table saws use a 10-inch circular blade that can cut up to 3.5 inches deep.

What is the most accurate miter saw?

The Metabo HPT MultiVolt 7-1/4″ dual bevel miter saw is one of the best-built, smoothest, and most accurate miter saws we’ve had the pleasure of testing. It comes with a premium price tag, but definitely makes sense for woodworkers and carpenters who really need portability.

What is the difference between a chop saw and a miter saw?

Whereas chop saws are rugged and relatively simple tools, mitre saws are designed and manufactured to make precision cuts at many different angles. Although a mitre saw can cut non-ferrous metal when used with the correct blade, they are most often used by joiners, kitchen fitters and cabinet makers to cut wood.

What saw can cut a 6x6?

This small center is simple to cut with a standard handsaw or a reciprocating saw fitted with a wood blade.

Is a miter saw worth it?

Miter saws are a valuable tool for the DIYer, and a must-have tool for a fully functioning workshop. They are designed to quickly cut crown molding, door frames, window casings, and picture frames. Miter saws can also make straight cuts for general do-it-yourself woodworking projects.

Can I use a 12 blade on a 14 miter saw?

Short answer: No. Long answer: You should only ever use larger circular saw blades, when the difference is fairly negligible (1 mm / 1/16″).

Can you put an 8 blade on a 10 miter saw?

As long as the diameter of the arbor hole on the stacked dado blade set matches the arbor diameter of your table saw or radial-arm saw—and the arbor is long enough for a dado blade—you can use an 8-inch dado blade on a 10-inch table saw.

Can you put a 7 blade on a 10 miter saw?

Yes you can. The only real difference, besides maximum cutting depth, is that smaller blades are often thinner and have a narrower kerf. I was curious if this could make them unsafe to run at the same speed as a larger blade, but actually the opposite is true.

Who makes the best 10 inch sliding miter saw?

RatingProductBest OverallDeWalt DW713 Compound Miter SawCHECK PRICETop PickBosch CM10GD 10 Inch Miter SawCHECK PRICEBest ValueHitachi C10FCG Mitre SawCHECK PRICEChicago 10 Inch Sliding Compound Miter SawCHECK PRICE

What is the difference between sliding and non sliding miter saw?

Well, put simply, a sliding miter saw contains rails, with the blade able to move both forwards and backwards thanks to these rails. A non-sliding miter saw doesn’t have these rails and the option to slide.

What does a dual bevel miter saw mean?

Dual-Bevel Compound Miter Saws. The blade angles of a dual bevel miter saw can adjust to both the left and right, as opposed to just one side, like the single bevel saw. Some people call this type of tool a double bevel miter saw because it can be adjusted to make cuts in any direction.

How much does a good miter saw cost?

A basic compound miter saw starts at $100, while miter saws with sliding blades start at $125. Dual-bevel miter saws start at $200, and professional-level miter saws with special features can cost as much as $800.

What is a sliding compound miter saw used for?

This is known as a sliding compound miter saw. Miter saws are primarily used for cutting wood trim and molding, but also can be used to cut metal, masonry, and plastics, provided the appropriate type of blade is used for the material being cut. Miter saws come in a variety of sizes.

Do you need a miter saw for baseboard?

Baseboard is the trim molding mounted along the floor. This type of trim used to be installed on all walls; the trim was used to hide the uneven crack between the wall and the floor. … Installing baseboard throughout a house is a good investment and it can be accomplished without using a miter saw.

Is a double bevel miter saw worth it?

Use a double bevel miter saw when you need to make a lot of bevel cuts in different directions. I bought a dual bevel miter saw for my workshop because I plan to install new baseboards throughout the house, and this will make the job much easier.

What miter saw to cut baseboards?

1. DEWALT Sliding Compound Miter Saw, 12-Inch. The DEWALT DWS779 12″ Sliding compound Miter saw features a powerful 15 amp that’s great for cutting baseboards and a 3,800 RPM motor that delivers extended power and durability.

Which saw to buy first?

A jigsaw is great for cutting curves and shapes, and it can also be used with a guide to make straight cuts, which is why this is the first power saw you should own. Unless you plan to rip long sheets of plywood, a jigsaw is preferable over a circular saw.